MATERIAL SAFETY DATA SHEET
Section1. Identification
Product name: Fluorene-9-bisphenol
Synonyms: 9,9-Bis(4-hydroxyphenyl)fluorene
Company: Xiaoyi City Jinjing Chemical CO.,Ltd
Xixie Bao Village,Xiabao Town,Xiaoyi City,
Shangxi province,China032300
Telephone: 0086-358-7663760
Fax: 0086-358-7663770
In case of emergency call: 0086-13593390547
(24 hours/day,7 days/week)
Section2.Composition,Information on Ingredients
Chemical name | CAS No. | EINECS No. | Concentration |
Fluorene-9-bisphenol | 3236-71-3 | 207-630-7 | 99% |
Section3: Hazards identification
Classification of the substance or mixture
Classification according to Regulation (EC) No 1272/2008
Skin irritation (Category 2), H315
Eye irritation (Category 2), H319
Acute aquatic toxicity (Category 1), H400
Chronic aquatic toxicity (Category 1), H410
For the full text of the H-Statements mentioned in this Section.
Classification according to EU Directives 67/548/EEC or 1999/45/EC
Xi Irritant R36, R38
N Dangerous for the R50/53
environment
For the full text of the R-phrases mentioned in this Section, see Section 16.
Label elements
Labelling according Regulation (EC) No 1272/2008
Pictogram
Signal word Warning
Hazard statement(s)
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H410 Very toxic to aquatic life with long lasting effects.
Precautionary statement(s)
P273 Avoid release to the environment.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove
contact lenses, if present and easy to do. Continue rinsing.
P501 Dispose of contents/ container to an approved waste disposal plant.
Supplemental Hazard none
Statements
Other hazards - none
Section4: First aid measures
Description of first aid measures
General advice:Consult a physician. Show this safety data sheet to the doctor in attendance.
If inhaled:If breathed in, move person into fresh air. If not breathing, give artificial
respiration. Consult a physician.
In case of skin contact:Wash off with soap and plenty of water. Consult a physician.
In case of eye contact: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If swallowed:Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Most important symptoms and effects, both acute and delayed
The most important known symptoms and effects are described in the labelling
Indication of any immediate medical attention and special treatment needed
no data available
Section5: Firefighting measures
Extinguishing media
Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Special hazards arising from the substance or mixture
Carbon oxides
Advice for firefighters
Wear self contained breathing apparatus for fire fighting if necessary.
Further information
no data available
Section6: Accidental release measures
Personal precautions, protective equipment and emergency procedures
Use personal protective equipment. Avoid dust formation. Avoid breathing vapours, mist or gas. Ensureadequate ventilation. Evacuate personnel to safe areas. Avoid breathing dust.
Environmental precautions
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the
environment must be avoided.
Methods and materials for containment and cleaning up
Pick up and arrange disposal without creating dust. Sweep up and shovel. Keep in suitable, closed
containers for disposal.
Section7: Handling and storage
Precautions for safe handling
Avoid contact with skin and eyes. Avoid formation of dust and aerosols.
Provide appropriate exhaust ventilation at places where dust is formed.
Conditions for safe storage, including any incompatibilities
Store in cool place. Keep container tightly closed in a dry and well-ventilated place.
Section8: Exposure controls/personal protection
Control parameters
Components with workplace control parameters
Exposure controls
Appropriate engineering controls
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Personal protective equipment
Eye/face protection
Safety glasses with side-shields conforming to EN166 Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin protection
Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive
89/686/EEC and the standard EN 374 derived from it.
Body Protection
Impervious clothing, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory protection
For nuisance exposures use type P95 (US) or type P1 (EU EN 143) particle respirator.For higher level protection use type OV/AG/P99 (US) or type ABEK-P2 (EU EN 143) respirator cartridges.
Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).
Control of environmental exposure
Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Section9: Physical and chemical properties
Information on basic physical and chemical properties
a) Appearance Form: powder
Colour: white
b) Odour: no data available
c) Odour Threshold: no data available
d)PH: no data available
e) Melting point/freezing: 224 - 226 °C
f) Boiling point:526.4 °C (760mmHg)
g) Flash point:241 °C
h) Evapouration rate: no data available
i) Flammability (solid, gas): no data available
j) Upper/lower: no data available
k) Steam pressure:1.07E-11mmHg(25 °C)
l) Density:1.288g/cm
m)Molecular formula: C25H18O2
n)Molecular weight : 350.4092
Other safety information: no data available
Section10: Stability and reactivity
Reactivity: no data available
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions: no data available
Conditions to avoid: no data available
Incompatible materials: Strong oxidizing agents
Hazardous decomposition products
Other decomposition products - no data available
Section11: Toxicological information
Information on toxicological effects
Acute toxicity: no data available
Skin corrosion/irritation: no data available
Serious eye damage/eye irritation: no data available
Respiratory or skin sensitisation: no data available
Germ cell mutagenicity: no data available
Carcinogenicity IARC: No component of this product present at levels greater than or equal to 0.1% is identified as probable, possible or confirmed human carcinogen by IARC.
Reproductive toxicity: no data available
Specific target organ toxicity - single exposure: no data available
Specific target organ toxicity - repeated exposure: no data available
Aspiration hazard: no data available
Additional Information RTECS: Not available
To the best of our knowledge, the chemical, physical, and toxicological properties have not been thoroughly investigated.
Section 12: Ecological information
Toxicity: no data available
Persistence and degradability: no data available
Bioaccumulative potential: no data available
Mobility in soil: no data available
Results of PBT and vPvB assessment
PBT/vPvB assessment not available as chemical safety assessment not required/not conducted
Other adverse effects: Very toxic to aquatic life.
Section13: Disposal considerations
Waste treatment methods
Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Dissolve or mix the material with a combustible solvent and burn in a chemical incinerator equipped with an afterburner and scrubber.
Contaminated packaging
Dispose of as unused product.
Section 14 . Transport Information
Dangerous goods no. : No data available
UN No. : No data available
Packaging categories: No data available
Packing mark: No data available
Packing method: Sealed drums with lining package, to prevent leakage
Transportation matters needing attention: In usual, use sealed OPP bags or aluminum foil bags as package; or use the kraft drums for with film plastic lining package, to prevent leakage.
Section 15 . Regulatory Information
Safety, health and environmental regulations specific for the product in question
Chemical name | Synonyms | CAS No. | EINECS NO. |
Fluorene-9-bisphenol | 9,9-Bis(4-hydroxyphenyl)fluorene
| 3236-71-3 | 207-630-7 |
European Inventory of Existing Commercial Chemical Substances (EINECS) | Not Listed. | ||
EC Inventory | Not Listed. | ||
United States Toxic Substances Control Act (TSCA) Inventory | Not Listed. | ||
China Catalog of Hazardous chemicals 2015 | Not Listed. | ||
New Zealand Inventory of Chemicals (NZIoC) | Not Listed. | ||
Philippines Inventory of Chemicals and Chemical Substances (PICCS) | Not Listed. | ||
Vietnam National Chemical Inventory | Not Listed. | ||
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) | Not Listed. | ||
Section 16. Other Information
Information on revision:
Creation Date: January 20th, 2020
Revision Date: February 5th, 2020
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantibility or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall the company be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential, or exemplary amages howsoever arising, even if the company has been advised of the possibility of such damages.