SAFETY DATA SHEET
Section 1. Identification
Product name: Bisphenoxyethanolfluorene(BPEF)
Company: Xiaoyi City Jinjing Chemical Co., Ltd
Xi Xie Bao Village,Xiabao Town,Xiaoyi City,
Shanxi Province,China 032300
Telephone: 0086-358-7663760
Fax: 0086-358-7663770
In case of emergency call: 0086-13593390547
(24 hours/day, 7days/week)
Section 2. Composition/information on ingredients
Chemical name | Abbreviated name | CAS No. | EINECS No. | Concentration |
Bisphenoxyethanolfluorene | BPEF | 117344-32-8 | none | 100% |
Section 3. Hazards identification
Primary routs of entry: Entry from eyes, skin inhalation
Health hazards: Causing skin irritation and serious eye irritation
Environmental hazards: None
Explosion hazard: None
Section 4. First aid measures
Skin contact: Wash off with soap and plenty of water. Consult a physician.
Eye contact: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
Inhalation: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
Injection: Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Section 5. Fire-fighting measures
Extinguishing media: Suitable extinguishing media
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
Specific hazards arising from the chemical: no data available
Special protective actions for fire-fighters: Wear self-contained breathing apparatus for firefighting if necessary.
Section 6. Accidental release measures
Personal precautions, protective equipment and emergency procedures:
Use personal protective equipment.
Avoid dust formation.
Avoid breathing vapours, mist or gas.
Ensure adequate ventilation.
Evacuate personnel to safe areas.
Avoid breathing dust.
For personal protection see section 8.
Environmental precautions:
Prevent further leakage or spillage if safe to do so.
Do not let product enter drains.
Discharge into the environment must be avoided.
Methods and materials for containment and cleaning up:
Pick up and arrange disposal.
Sweep up and shovel.
Keep in suitable, closed containers for disposal.
Section 7. Handling and storage
Precautions for safe handling:
Avoid contact with skin and eyes.
Avoid formation of dust and aerosols.
Avoid exposure - obtain special instructions before use.
Provide appropriate exhaust ventilation at places where dust is formed.
Conditions for safe storage, including any incompatibilities:
Store in cool place.
Keep container tightly closed in a dry and well-ventilated place.
Section 8. Exposure controls/personal protection
Occupational Exposure limit values: no data available
Biological limit values: no data available
Appropriate engineering controls:
Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Eye/face protection:
Use safety glasses with side-shields, and use equipment for eye protection.
Skin protection:
Wear impervious clothing. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace. Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique(without touching glove's outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands.
Respiratory protection:
Wear dust mask when handling large quantities.
Thermal hazards: no data available
Section 9. Physical and chemical properties
Physical state: White powder state
Colour: White
Odour: No data available
Melting point: 163°C-165°C(lit.)
Boiling point or initial boiling point and boiling range: 160°C/6mmHg(lit.)
Flammability: No data available
Lower and upper explosion limit / flammability limit: No data available
Flash point: 65°C(lit.)
Auto-ignition temperature: No data available
Decomposition temperature: No data available
PH: No data available
Kinematic viscosity: No data available
Solubility: No data available
Partition coefficient n-octanol/water (log value): No data available
Vapour pressure: 9.06E-16mmHg at 25°C
Density and/or relative density: 1.248g/cm3
Purity: 99.0%Min
Relative vapour density: No data available
Particle characteristics: No data available
Section 10. Stability and Reactivity
Reactivity: No data available
Chemical stability: Stable under recommended storage conditions.
Possibility of hazardous reactions: No data available
Conditions to avoid: No data available
Incompatible materials: No data available
Hazardous decomposition products: No data available
Section 11. Toxicological Information
Oral: No data available
Inhalation: No data available
Dermal: No data available
Skin corrosion/irritation: No data available
Serious eye damage/irritation: No data available
Respiratory or skin sensitization: No data available
Germ cell mutagenicity: No data available
Carcinogenicity: No data available
Reproductive toxicity: No data available
STOT-single exposure: No data available
STOT-repeated exposure: No data available
Aspiration hazard: No data available
Section 12. Ecological Information
Ecotoxicological toxicity: No data available
Biodegradability: No data available
Non-biodegradability: No data available
Bioaccumulation or bioaccumulation: No data available
Other harmful effects: No data available
Section 13. Disposal considerations
Product:
The material can be disposed of by removal to a licensed chemical destruction plant or by controlled incineration with flue gas scrubbing.
Do not contaminate water, foodstuffs, feed or seed by storage or disposal.
Do not discharge to sewer systems.
Contaminated packaging:
Containers can be triply rinsed (or equivalent) and offered for recycling or reconditioning.
Alternatively, the packaging can be punctured to make it unusable for other purposes and then be disposed of in a sanitary landfill.
Controlled incineration with flue gas scrubbing is possible for combustible packaging materials.
Section 14. Transport information
Dangerous goods no. : No data available
UN No. : No data available
Packaging categories: No data available
Packing mark: No data available
Packing method: Sealed drums with lining package, to prevent leakage
Transportation matters needing attention: In usual, use sealed OPP bags or aluminum foil bags as package; or use the kraft drums for with film plastic lining package, to prevent leakage.
Section 15. Regulatory Information
Safety, health and environmental regulations specific for the product in question
Chemical name | Abbreviated name | CAS No. | EINECS No. |
Bisphenoxyethanolfluorene | BPEF | 117344-32-8 | None |
European Inventory of Existing Commercial Chemical Substances (EINECS) | Not Listed. | ||
EC Inventory | Not Listed. | ||
United States Toxic Substances Control Act (TSCA) Inventory | Not Listed. | ||
China Catalog of Hazardous chemicals 2015 | Not Listed. | ||
New Zealand Inventory of Chemicals (NZIoC) | Not Listed. | ||
Philippines Inventory of Chemicals and Chemical Substances (PICCS) | Not Listed. | ||
Vietnam National Chemical Inventory | Not Listed. | ||
Chinese Chemical Inventory of Existing Chemical Substances (China IECSC) | Not Listed. | ||
Section 16. Other Information
Information on revision:
Creation Date: January 20th, 2020
Revision Date: January 22nd, 2020
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantibility or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall the company be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential, or exemplary amages howsoever arising, even if the company has been advised of the possibility of such damages.